Cleaning the Pump Dispenser

A pump dispenser should last through several bottles of HI-FLOAT. Check out our Pump Cleaning video on YouTube. If the pump becomes clogged and difficult to push down, pump warm water though it to clear the clog. If this does not work, the pump may be cleaned as follows:

Unscrew the top of the pump and place both sections in a pan of hot tap water.

Let the pump sit in the pan overnight.

Rinse the pump parts with warm water. Make sure the air holes under the threaded cap are clean.

Reassemble the pump.

Placing the red end cap on the end of the outlet nozzle between uses will help keep the pump from becoming clogged.